A small piece of veneer of the same type of wood, 5" x 3". I got my own from the block when I cut it to width but you might not be as lucky.

A piece of white hardwood for the grill 1/2" thick by 2" x 3" . I used some hop hornbeam, a very hard close grained wood, as the grill will be made of many very thin strips.

18" of chair caning material

Flat black paint

A hardwood dowel 3/8" x 12"

Five hardwood wheels 2 1/2" diameter

Five 5/16" diameter pins to hold the wheels

Two headlight units 3/4" diameter

A can of Polymerized Tung Oil