Band saw with 1/8" and 1/4" blades able to take material 6" high.

Table top drill press

Saw toothed Forstner bits; 2 3/4" and 1 1/2" diameter. If you want the authetic "rear wheel lost in the wheel well" look get a 3" diameter bit as well. And a 2 1/2" one would save time on the spare tire well.

Router, Router table, Router bits; 1/2" straight sided, 1/4" quarter round, and 1/2" quarter round

Dremel tool with straight sided bit, tiny spherical bit and a pointed cone

shaped bit.

Back saw

Dovetail saw

Coping saw

Rasp

Plane

Micro file with one side flat the other curved

"V" chisel

"C" clamps, squeeze clamps, and pipe clamps

1 1/2" wide paint brush

Various scrap pieces of wood, rags, a knife, combination square with protractor and centre finding attachments, school geometry set, etc...